Engineering, 11.10.2019 19:30 britney9285

A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m·k), and the wire/sheath interface is characterized by a thermal contact resistance of r, e=3x1 convection heat transfer coefficient at the outer surface of the sheath is 15 w/m2 . k, and the temperature of the ambient air is 20°c. if the temperature of the insula- 0-4m2. k/w. the tion may not exceed 50'c, what is the maxtimun allow- able electrical power that may be dissipated per unit length of the conductor? what is the critical radius of the insulation?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m·k), and...

Questions