Suppose that the instruction format for a modified little man computer requires two consecutive locations for each instruction. the high-order digits of the instruction are located in the first mail slot, followed by the low –order digits. the ir is large enough to hold the entire instruction and can be addressed as ir [high] and [ir] low to load it. you may assume that the op code part of the instruction uses ir [high] and that the address is found in ir [low]. write the fetch-execute cycle for an add instruction on this machine.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?