Engineering, 15.10.2019 21:30 Caixiayang3613

An experimentalist wishes to measure the resistance rs of a sample located down in a cryostat. two wires, each with resistance r = 10ω, carry an ac current i = 1.0 ma down into the cryostat, through the sample, and back up to ground. the voltage across the sample is measured with a differential amplifier. the actual sample resistance is rs = 0.10ω. 1.0ma r 10ω rs 0.10ω r 10ω − + vout (a) what is the differential voltage at the amplifier inputs? (b) what is the common-mode voltage? (c) suppose the amplifier is similar to the one you will build in lab, with gdiff = 10 and gcm = 0.50. what is the amplitude of the ac signal at vout? (d) if the experimenter assumed that her amplifier was ideal, with gdiff = 10 but gcm = 0, what would she report for the value of rs? (e) what is the minimum cmrr (= gdiff/gcm) her amplifier would need in order to measure rs to an accuracy of 1%?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window

Answers: 3

Answer

Engineering, 06.07.2019 03:10

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

Answer

You know the right answer?

An experimentalist wishes to measure the resistance rs of a sample located down in a cryostat. two w...

Questions