Engineering, 16.10.2019 16:20 bethdove9466

Four horizontal, homogeneous, isotropic geologic formations, each 5 m thick, overlie one another. if the hydraulic conductivities are 10-4 , 10-6 , 10-4 , and 10-6 m/s, respectively, calculate the horizontal and vertical components of hydraulic conductivity for the equivalent homogeneous-but-anisotropic formation. b. repeat for hydraulic conductivities of 10-4 , 10-8 , 10-4 , and 10-8 m/s, c. repeat for hydraulic conductivities of 10-4 , 10-10, 10-4 , and 10-10 m/s.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

You know the right answer?

Four horizontal, homogeneous, isotropic geologic formations, each 5 m thick, overlie one another. if...

Questions