Engineering, 18.10.2019 17:30 jeremiahjohnsonclapg
Create the conceptual design and database schema for a library system. (this exercise is only addressing a small part of a real library system). patrons (customers) borrow books from the library. all books have an isbn number that identifies the book unique. for each book, the system must store isbn, author name, current status (on-loan, or available) library must keep patron identification as well as contact information. it is safe to assume that the library assigns a library card with an identification number. the library also keeps track of the number of books on loan to a customer, as well as the outstanding fines (dollars and cents) due from the customer.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Engineering, 04.07.2019 19:20
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
You know the right answer?
Create the conceptual design and database schema for a library system. (this exercise is only addres...
Questions
Computers and Technology, 30.11.2020 18:00
Mathematics, 30.11.2020 18:00
Mathematics, 30.11.2020 18:00
Computers and Technology, 30.11.2020 18:00
