subject
Engineering, 18.10.2019 20:10 Kkampudiaa

Radioactive waste is packed in a long, thin-walled cylindrical container. the waste generates thermal energy non-uniformly, according to the relationship qgen=qo[1-(r-ro)^2], where qo is a constant and ro is the radius of the container. steady-state conditions are maintained by submerging the container in a liquid is at t(infinity) and provides a uniform convection coefficient h. obtain an expression for the temperature ts of the container wall under steady conditions.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Radioactive waste is packed in a long, thin-walled cylindrical container. the waste generates therma...
Questions
question
Biology, 24.03.2021 21:00
question
Mathematics, 24.03.2021 21:00
question
Health, 24.03.2021 21:00
question
Mathematics, 24.03.2021 21:00
Questions on the website: 13722360