subject
Engineering, 18.10.2019 23:00 bskyeb14579

Aclosed, rigid tank fitted with a paddle wheel contains 2.0 kg of air, initially at 200oc, 1 bar. during an interval of 10 minutes, the paddle wheel transfers energy to the air at a rate of 1 kw. during this time interval, the air also receives energy by heat transfer at a rate of 0.5 kw. these are the only energy transfers. assume the ideal gas model for the air, and no overall changes in kinetic or potential energy. do not assume specific heats are constant. determine the change in specific internal energy for the air, in kj/kg, and the final temperature of the air, in oc.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
Aclosed, rigid tank fitted with a paddle wheel contains 2.0 kg of air, initially at 200oc, 1 bar. du...
Questions
Questions on the website: 13722367