subject
Engineering, 19.10.2019 00:30 rina62

Suppose that the five measured samplertt values (see section 3.5.3) are 106 ms, 120 ms, 140 ms, 90 ms, and 115 ms. compute the estimatedrtt after each of these samplertt values is obtained, using a value of alpha= 0.125 and assuming that the value of estimatedrtt was 100 ms just before the first of these five samples were obtained. compute also the devrtt after each sample is obtained, assuming a value of beta= 0.25 and assuming the value of devrtt was 5 ms just before the first of these five samples was obtained. compute the tcp timeoutinterval after each of these samples is obtained.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
You know the right answer?
Suppose that the five measured samplertt values (see section 3.5.3) are 106 ms, 120 ms, 140 ms, 90 m...
Questions
question
Mathematics, 23.06.2019 13:30
Questions on the website: 13722360