Engineering, 19.10.2019 03:30 iwannasleep
Astructural component is fabricated from an alloy that has a plane strain fracture toughness of 45 mpa √ m . it has been determined that this component fails at a stress of 300 mpa when the maximum length of a surface crack is 0.95 mm. what is the maximum allowable surface crack length (in mm) without fracture for this same component exposed to a stress of 300 mpa and made from another alloy with a plane strain fracture toughness of 57.5 mpa √ m
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Astructural component is fabricated from an alloy that has a plane strain fracture toughness of 45 m...
Questions
Biology, 18.12.2020 16:50
Mathematics, 18.12.2020 16:50
Geography, 18.12.2020 16:50
Computers and Technology, 18.12.2020 16:50
Mathematics, 18.12.2020 16:50
Physics, 18.12.2020 16:50
History, 18.12.2020 16:50
