Asteel frame supports a concrete mass, which in turn supports a exhaust fan. at a speed of 400 rpm, the amplitude of steady state vibration is 4 mm. at a speed of 500 rpm the amplitude of steady state vibration is 11.6 mm. if it is required that at the maximum turbine speed of 520 rpm the maximum steady-state amplitude be less than 2 mm, then the stiffness of the system needs to be changed. determine the minimum value of stiffness necessary for this design specification suppose the original stiffness of the system is k

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj