Engineering, 25.10.2019 04:43 msjbryant33

Steam enters a heat exchanger operating at steady state at 0.07 mpa with a specific enthalpy of 2431.6 kj/kg and exits at the same pressure as saturated liquid. the steam mass flow rate is 1.5 kg/min. a separate stream of air with a mass flow rate of 100 kg/min enters at 30 degrees celsius and exits at 60 degrees celsius. the ideal gas model with cp = 1.005 kj/kg. k can be assumed for air. kinetic and potential energy effects are negligible. determine a) the quality of the entering steam and b) the rate of heat transfer between the heat exchanger and its surroundings, in kw. hint: (b) use the relationship between the change in enthalpy and the change in the temperature for an ideal gas.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

Steam enters a heat exchanger operating at steady state at 0.07 mpa with a specific enthalpy of 2431...

Questions