Engineering, 25.10.2019 22:43 sarahbennett11p4yxlb
Adisplacement transducer has the following specifications: linearity error: ±0.25% readingdrift: ±0.05% /℃ readingsensitivity error: ±0.25% readingexcitation : 10-25 vdc output: 0-5 vdcrange: 0-5 cmthe transducer output is to be indicated on a voltmeter having a stated accuracy of ± 0.1% reading with a resolution of 10 μv. the system is to be used at room temperature, which can vary by ±10○c. estimate an uncertainty in a nominal displacement of 2 cm at the design stage. assume 95% confidence. assume sensitivity is k = 1 v/cm.
Answers: 1
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Adisplacement transducer has the following specifications: linearity error: ±0.25% readingdrift: ±...
Social Studies, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
Computers and Technology, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
Computers and Technology, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
Mathematics, 12.02.2020 22:29
History, 12.02.2020 22:29