Alead–tin alloy of composition 30 wt% sn–70 wt% pb is slowly heated from a temperature of 150°c (300°f).
(a) at what temperature does the first liquid phase form?
(b) what is the composition of this liquid phase?
(c) at what temperature does complete melting of the alloy occur?
(d) what is the composition of the last solid remaining prior to complete melting?

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.