subject
Engineering, 30.10.2019 20:31 personm21

There are two water tanks a and b separated by a vertical wall with a hole at 3. water is steadily áowing in at 1 into a rectangular tank a with a length of 5 ft and a width of 5 ft (into the paper). the áow rate at 1 is measured as q_ 1 = 5 ft3/s . at the time instant of interest, h1 = 15 ft, and water is also steadily áowing out into tank b at the rate of 4 ft3/s. at this instant, h2 is 12 ft. tank b has a length of 8 ft and the same width as tank a

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
There are two water tanks a and b separated by a vertical wall with a hole at 3. water is steadily á...
Questions
question
Arts, 08.04.2020 23:29
question
Mathematics, 08.04.2020 23:29
Questions on the website: 13722360