Engineering, 31.10.2019 01:31 nik2lit
Design 1)let the controller be a constant, i. e., letc(s) =k. propose a value for the controller thatsatisfies the three design objectives and answer the following questions: 1) what is the closed-loop transfer function? 2) what is the range ofkfor closed-loop stability? 3) what is the range ofkfor design objective (ii)? 4) what is the range ofkfor design objective (iii)? 5) pick akvalue that satisfies all three objectives. find the closed-loop poles, the steady-state error, andthe percent overshoot for the value ofkyou chose.6) sketch the closed-loop step-response for thekvalue you picked.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Design 1)let the controller be a constant, i. e., letc(s) =k. propose a value for the controller tha...
Questions
Computers and Technology, 25.12.2019 00:31
