Engineering, 01.11.2019 04:31 spearjj

Chapter 06, problem 6.20 multistep a brass alloy is known to have a yield strength of 275 mpa (40,000 psi), a tensile strength of 380 mpa (55,000 psi), and an elastic modulus of 103 gpa (15.0×106 psi). a cylindrical specimen of this alloy 6.7 mm (0.26 in.) in diameter and 282 mm (11.11 in.) long is stressed in tension and found to elongate 5.9 mm (0.23 on the basis of the information given, is it possible to compute the magnitude of the load that is necessary to produce this change in length? if not, explain why.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

Chapter 06, problem 6.20 multistep a brass alloy is known to have a yield strength of 275 mpa (40,00...

Questions