Engineering, 02.11.2019 03:31 maddo36
If the surface energy of a magnesium oxide - nickel oxide (mgo-nio) solid solution is 1.13 j/m2 and its elastic modulus is 196 gpa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile stress of 39 mpa normal to this elliptical flaw ?
be careful !
make sure you reference the flaw geometry figures that explain how the length of a flaw type (internal / external) correlates to the value of a.
answer format: x. xx
unit: mm
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
If the surface energy of a magnesium oxide - nickel oxide (mgo-nio) solid solution is 1.13 j/m2 and...
Mathematics, 28.12.2019 21:31
Mathematics, 28.12.2019 21:31
Mathematics, 28.12.2019 21:31
Business, 28.12.2019 21:31
Mathematics, 28.12.2019 21:31
Mathematics, 28.12.2019 21:31
Social Studies, 28.12.2019 21:31
Arts, 28.12.2019 21:31
Mathematics, 28.12.2019 21:31
Chemistry, 28.12.2019 21:31