Engineering, 02.11.2019 06:31 Wavy10691
11. a planned extrusion operation involves steel at 800°c, with an initial diameter of 100 mm and a final diameter of 20 mm. two presses, one with a capacity of 20 mn and the other of 10 mn, are available for this operation. obviously, the larger press requires greater care and more expensive tooling. is the smaller press sufficient for the operation? if not, what recommendations would you make to allow use of the smaller press?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
You know the right answer?
11. a planned extrusion operation involves steel at 800°c, with an initial diameter of 100 mm and a...
Questions
Mathematics, 14.09.2019 08:30
