subject
Engineering, 05.11.2019 02:31 lazarus10

Agas mixture contains 30.0 mole% h2o(v) and 70.0 mole% n2. the gas temperature and absolute pressure at the start of each of the three parts of this problem are 75°c and 900.0 mm hg. ideal gas behavior may be assumed in every part of this problem. a. if some of the gas mixture is put in a cylinder and slowly cooled at constant pressure, at what temperature would the first drop of liquid form? °c b. if a 30.0 liter flask is filled with some of the gas mixture and sealed, and 70.0% of the water vapor in the flask is condensed, what volume would be occupied by the liquid water? cm3 what would be the system temperature? °c c. if the gas mixture is stored in a rigid-walled cylinder and a low-pressure weather front moves in and the barometric (atmosopheric) pressure drops from 760 mm hg to 720.0 mm of hg, what would be the new gauge pressure in the cylinder? mm hg

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
Agas mixture contains 30.0 mole% h2o(v) and 70.0 mole% n2. the gas temperature and absolute pressure...
Questions
question
Mathematics, 10.02.2021 17:50
question
History, 10.02.2021 17:50
question
Mathematics, 10.02.2021 17:50
question
Chemistry, 10.02.2021 17:50
question
Chemistry, 10.02.2021 17:50
Questions on the website: 13722367