Engineering, 05.11.2019 05:31 bzhsh8282
Acylindrical metal specimen having an original diameter of 11.86 mm and gauge length of 54.0 mm is pulled in tension until fracture occurs. the diameter at the point of fracture is 6.59 mm, and the fractured gauge length is 73.0 mm. calculate the ductility in terms of (a) percent reduction in area (percent ra), and (b) percent elongation (percent el).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Acylindrical metal specimen having an original diameter of 11.86 mm and gauge length of 54.0 mm is p...
Questions
Social Studies, 01.08.2019 13:47
Business, 01.08.2019 13:47
Social Studies, 01.08.2019 13:47
Computers and Technology, 01.08.2019 13:47
