An ideal gas mixture with k = 1.31 and a molecular weight of 23 is supplied to a converging nozzle at p0 = 5 bar, t0 = 700 k, which discharges into a region where the pressure is 1 bar. the exit area is 50 cm2 . for steady isentropic flow through the nozzle, determine:
(a) the exit temperature of the gas, in k.
(b) the exit velocity of the gas, in m/s.
(c) the mass flow rate, in kg/s.

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air

Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.