Write a method splitstack that takes a stack of integers as a parameter and splits it into negatives and non-negatives. the numbers in the stack should be rearranged so that all the negatives appear on the bottom of the stack and all the non-negatives appear on the top. in other words, if after this method is called you were to pop numbers off the stack, you would first get all the nonnegative numbers and then get all the negative numbers. it does not matter what order the numbers appear in as long as all the negatives appear lower in the stack than all the non-negatives. you may use a single queue as auxiliary storage.

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?