Engineering, 09.11.2019 04:31 vannah94
Aconstant pressure container is filled with 1 kg of stainless steel and 0.5 kg of pvc (polyvinyl chloride) both at 20c and 0.25 kg of hot air at 500 k, 100 kpa. the container is now left alone with no external heat transfer. find
a. the final temperature
b. the process work.
Answers: 2
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Aconstant pressure container is filled with 1 kg of stainless steel and 0.5 kg of pvc (polyvinyl chl...
History, 01.08.2019 22:00
Biology, 01.08.2019 22:00
Advanced Placement (AP), 01.08.2019 22:00
Mathematics, 01.08.2019 22:00
Health, 01.08.2019 22:00
Social Studies, 01.08.2019 22:00
History, 01.08.2019 22:00
English, 01.08.2019 22:00
Mathematics, 01.08.2019 22:00