Engineering, 11.11.2019 18:31 annethelusma25

Atwo-stage compression refrigeration system operates with refrigerant-134a between the pressure limits of 1 and 0.14 mpa. the refrigerant leaves the condenser as a saturated liquid and is throttled to a flash chamber operating at 0.5 mpa. the refrigerant leaving the low-pressure compressor at 0.5 mpa is also routed to the flash chamber. the vapor in the flash chamber is then compressed to the condenser pressure by the high pressure compressor, and the liquid is throttled to the evaporator pressure.

assuming the refrigerant leaves the evaporator as saturated vapor and both compressors are isentropic, determine

(a) the fraction of the refrigerant that evaporates as it is throttled to the flash chamber,

(b) the rate of heat removed from the refrigerated space for a mass flow rate of 0.25 kg/s through the condenser, and (c) the coefficient of performance.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

Atwo-stage compression refrigeration system operates with refrigerant-134a between the pressure limi...

Questions