subject
Engineering, 12.11.2019 02:31 psa180

Calculate z and v for nitrogen trifluoride at 300 k and 95 bar by the following equations (a) the truncated virial equation [eq. (3.38)] with the following values of virial coefficients b--83.5 cm3.mol-1 c-5592 cm6.mol-2 (b) the truncated virial equation [eq. (3.36)], with a value of b from the generalized pitzer correlation [eqs. (3.58 (3.62)] (c) the redlich/kwong equation (d) the soave/redlich/kwong equation (e) the peng/robinson equation for nf3. tc-234 k, pc-44.6 bar, and ? 0.126 equation (3.38) pv rt equation (3.36) bc pv rt bp rt equation (3.58) abp rtc equation (3.62) b0.139- 0.172 t4.2

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Calculate z and v for nitrogen trifluoride at 300 k and 95 bar by the following equations (a) the tr...
Questions
question
Mathematics, 17.06.2020 22:57
Questions on the website: 13722361