Consider a flat rolling operation of an aluminum 1100-0 workpiece. the initial thickness of the workpiece is 0.25 in, width is 8 in and the roll radius is 10 in. if the workpiece thickness is reduced by 0.02 inches per pass, findthe roll force for each of the first three passes: h1=0.23in, h2=0.21in; h3=0.19in. assume an ideal rolling operation (i. e. friction is zero) and that deformation follows plane strain assumptions. there’s an example rolling calculation on the canvas lab website for 3221.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?