subject
Engineering, 13.11.2019 01:31 faithcalhoun

Two logical statements a and b are logically equivalent if (a < => b) is valid. we have two knowledge bases, kb1 and kb2.. write a function check_equivalence(kb1, kb2) that: returns true if kb1 and kb2 are logically equivalent. returns false otherwise. your pseudocode needs to use or modify tt-entails from the textbook or slides, and can call any of the functions given in the textbook or slides, as long as such code and functions are used correctly, with correct names for the functions, and with well-specified values for all variables and arguments.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
question
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
question
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
You know the right answer?
Two logical statements a and b are logically equivalent if (a < => b) is valid. we have two k...
Questions
question
Mathematics, 22.01.2021 09:10
question
Mathematics, 22.01.2021 09:10
question
Mathematics, 22.01.2021 09:10
Questions on the website: 13722360