subject
Engineering, 13.11.2019 01:31 taylorbean315

Write a program that will find the pairs of coordinates that are closest to each other, as if these were 2 planes in space, flying too close to each other. report of the 2 pairs of coordinates that are closest to each other. display a warning message such as: "alert, alert! plane at coordinate: x-axis, y-axis is too close to plane at coordinate: x-axis, y-axis." hints: 1.) define a class that can hold 2 coordinates. call it the location class. implement the comparable interface, and thus create a compareto() method. 2.) create an array of location objects, from reading the input file. (note: the first record in the input file contains the number of records in the file). 3.) sort the array by either x- or y-coordinate (use either the insertion sort or the selection sort algorithm. do not use collections. 4.) compare each object in the sorted array with the previous object, and calculate their distance by using the distance formula below: double distancebetween2points = math. sqrt((x2 - x1)^2 + (y2 - y1)^2) note: to get the square of a number in java, use math. pow(base, exponent) 5.) good luck! their safety depends on you! note: to process the input file that contains spaces and commas separating each word in each record, use the following method to specify multiple delimeters:

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
Write a program that will find the pairs of coordinates that are closest to each other, as if these...
Questions
question
Mathematics, 08.07.2019 08:30
question
Mathematics, 08.07.2019 08:30
Questions on the website: 13722367