Engineering, 13.11.2019 19:31 eddie828

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an internal pressure p. the pressure vessel is made from steel which has elastic material constants e = 200 gpa and ν = 0.30. if the vessel has a length ` = 3 m, an inner radius of r = 0.65 m, and a wall thickness t = 15 mm, determine the following items for a pressure p = 25 mpa. assume that elongation is positive and contraction is negative.
(a) determine the hoop (circumferential) strain in the pressure vessel.
(b) determine the axial (longitudinal) strain in the pressure vessel.
(c) determine change in the circumference of the pressure vessel caused by the internal pressure.
(d) determine the change in the outer diameter of the pressure vessel caused by the internal pressure.
(e) determine the change in the length of the pressure vessel caused by the internal pressure.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

Answer

You know the right answer?

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an inte...

Questions