Engineering, 13.11.2019 22:31 booitsmrradl3385

Problem 7-25 (algorithmic) george johnson recently inherited a large sum of money; he wants to use a portion of this money to set up a trust fund for his two children. the trust fund has two investment options: (1) a bond fund and (2) a stock fund. the projected returns over the life of the investments are 9% for the bond fund and 20% for the stock fund. whatever portion of the inheritance george finally decides to commit to the trust fund, he wants to invest at least 60% of that amount in the bond fund. in addition, he wants to select a mix that will enable him to obtain a total return of at least 8.5%. formulate a linear programming model that can be used to determine the percentage that should be allocated to each of the possible investment alternatives. if required, round your answers to three decimal places. let b = percentage of funds invested in the bond fund s = percentage of funds invested in the stock fund b + s s. t. b bond fund minimum b + s minimum return b + s percentage requirement solve the problem using the graphical solution procedure. if required, round the answers to one decimal place. optimal solution: b = , s = value of optimal solution is %

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

Problem 7-25 (algorithmic) george johnson recently inherited a large sum of money; he wants to use...

Questions