subject
Engineering, 13.11.2019 23:31 bremarie102013

Lows over an airfoil result in the formation of vortices in the downstream wake. these structures are shed much like that which is seen for circular cylinders and the frequency of shedding is important in the understanding of the flow field. this is particularly important for micro uav's as they affect the flight characteristics of these small vehicles. to determine the shedding frequency, f, of the wake, researchers decide to run a model test with a 1/10 scale model wing in a water tunnel. the frequency of oscillation, f, is a function of the water speed, u, the chord length of the airfoil, c, the angle of attack, a, the density of the water, p, and the viscosity of the water, μ. at full scale, 1-10 m/s, c-1.2 m and, α-0.089 radians (i0' (a) (10 pts) find the non-dimensional groups associated with the problem. use c, u, and rho as the repeating variables. (b(10 pts) what should the parameters a, c, and u be for model test. (c) (5 pts) if the frequency measured in the water tunnel is 75 1/s, estimate the frequency for the full-scale wing. (d) (5 points) if the proposed speed for the model test is too fast, what could you do to match the 11 terms and reduce the flow speed at the same time? show how your proposed solution reduce the flow speed.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Lows over an airfoil result in the formation of vortices in the downstream wake. these structures ar...
Questions
question
Mathematics, 30.07.2019 12:20
question
Mathematics, 30.07.2019 12:20
Questions on the website: 13722362