Engineering, 14.11.2019 02:31 supasavb99

Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a stream of this mixture flowing at a rate of 150.0 l/s is cooled and compressed, causing some but not all of the vapor to condense. (treat this process as a single-unit operation.) liquid and vapor product streams emerge from the process in equilibrium at t (°c) and 1100 mmhg. the vapor product contains 60.0 mole% butane. determine: a)the required final temperature (t) b)the composition of the liquid product (component mole fractions) c)the molar flow rates of the liquid and vapor products.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

You know the right answer?

Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a st...

Questions