subject
Engineering, 14.11.2019 02:31 vrw28

Consider a message signal m(t) containing frequency components at 100, 200, and 400 hz. this signal is applied to an ssb modulator together with a carrier at 100 khz. with only the upper sideband retained. in the coherent detector used to recover m(t), the local oscillator supplies a sine wave of frequency 100.02 khz. determine the frequency components of the detector output. repeat your analysis, assuming that only the lower sideband is transmitted.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
Consider a message signal m(t) containing frequency components at 100, 200, and 400 hz. this signal...
Questions
Questions on the website: 13722359