subject
Engineering, 14.11.2019 06:31 ricesonice5

1. an experiment was conducted to determine the dissolved oxygen in ground water at one specific location. the experimental uncertainty of the dissolved oxygen was estimated as ±1.5 mg/l. show all your work. a. the first set of six measurements were: 8.8, 3.1, 4.2, 6.2, 7.6 and 3.6 mg/l. determine the mean, sample standard deviation, and the standard error of the mean (sem). b. after examining the statistics of part "a," the experimentalists collect an additional six measurements: 5.2, 8.6, 6.3, 1.8, 6.8 and 3.9 mg/l. combine all 12 measurements and determine the mean, sample standard deviation, and the standard error of the mean (sem). c. complete the following to report the results of part "b": "with 95% confidence, the dissolved oxygen was xxx mg/l ±xxx mg/l. the population mean is probable within ±xxx mg/l. the probable range of the mean of dissolved oxygen is xxx to xxx mg/l (for 95% confidence). d. comment on the differences in part "a" and "b" regarding the mean, sample standard deviation, and the standard error of the mean (sem). in particular, mention why these differences were or were not expected. e. comment on the value of the experimental uncertainty compared to the values of the statistical quantities. f. comment on why anova should or should not be used to evaluate this experiment.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
1. an experiment was conducted to determine the dissolved oxygen in ground water at one specific loc...
Questions
question
Mathematics, 05.03.2021 17:00
question
Mathematics, 05.03.2021 17:00
question
Mathematics, 05.03.2021 17:00
question
Mathematics, 05.03.2021 17:00
question
History, 05.03.2021 17:00
question
Social Studies, 05.03.2021 17:00
Questions on the website: 13722362