subject
Engineering, 14.11.2019 20:31 loveuncondition

Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater. superheated vapor enters the turbine at 10 mpa, 480 c and the condenser pressure is 6 kpa. steam expands through the first stage turbine where some is extracted and diverted to a closed feedwater heater at 0.7 mpa. condensate drains from the feedwater heater as saturated liquid at 0.7 mpa and is trapped into the condenser. the feedwater leaves the heater at 10 mpa and a temperature equal to the saturation temperature at 0.7 mpa.

for the cycle of problem 8.49, reconsider the analysis assuming the pump and each turbine stage have isentropic efficiencies of 80%.

determine:

a) the rate of heat transfer to the working fluid passing through the steam generator in kj per kg of steam entering the first stage turbine.

b) the thermal efficiency

c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water in kj per kg of steam entering the first stage turbine.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater....
Questions
question
Mathematics, 12.03.2021 02:50
question
Mathematics, 12.03.2021 02:50
question
Mathematics, 12.03.2021 02:50
question
Mathematics, 12.03.2021 02:50
Questions on the website: 13722359