Determine the largest axial load p which may be safely supported by a flat steel bar consisting of two portions, both 10 mm thick and respectively 40 and 60 mm wide, connected by fillets of radius r = 10 mm.
assume the material is brittle(%el < 5%), has an ultimate strength of 246 mpa, and a factor of safety of 1.1 is required.

55.908 KN

Explanation:

The ratio D/d=60/40=1.5

The ratio r/d=10/40=0.25

From the curve attached as missing part of the question and using the above two ratios we get concentration factor, k=1.6

Therefore,

Since factor of safety, FS is given by

Allowable strength=

Substituting 223.63 Mpa for then for d=40 the stress is given by

Also, hence

P=55.908 KN

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer:

i dont know the answer but good luck

explanation: