Asimple supported beam at x0 = 0 and xn = l with a uniform load w and the

vertical deflection v(x) is described by the boundary value problem

d

2

v

dx2

=

x−l

3ei

wx, v(0) = 5, v(l) = 100

where l is the length of the beam, e represents the young’s modulus of the material from which

the beam is fabricated and i is the second moment of area of the beam’s cross–section. suppose

l = 15 m, e = 210 kn/m

2

, i = 370.5 m2

and w = 9.8 kn/m. use the shooting method to

approximate the vertical deflection, v(x) with the step size, h = 3, the first guess, z0 = 10 and

the second guess, z0 = 5.

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?