subject
Engineering, 18.11.2019 19:31 sosick3595

Write a loop that sets each array element to the sum of itself and the next element, except for the last element which stays the same. be careful not to index beyond the last element. ex:
initial scores: 10, 20, 30, 40
scores after the loop: 30, 50, 70, 40
the first element is 30 or 10 + 20, the second element is 50 or 20 + 30, and the third element is 70 or 30 + 40. the last element remains the same.
sample output:
#include
int main(void) {
const int scores_size = 4;
int bonusscores[scores_size];
int i = 0;
bonusscores[0] = 10;
bonusscores[1] = 20;
bonusscores[2] = 30;
bonusscores[3] = 40;
/* your solution goes here */
for (i = 0; i < scores_size; ++i) {
printf("%d ", bonusscores[i]);
}
printf("\n");
return 0;
}

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
question
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
You know the right answer?
Write a loop that sets each array element to the sum of itself and the next element, except for the...
Questions
question
Mathematics, 22.04.2020 22:43
question
English, 22.04.2020 22:43
Questions on the website: 13722367