subject
Engineering, 19.11.2019 02:31 mikayla843

2. consider a si npn bjt. discuss how a change in one of the design parameters affect the emitter injection efficiency, the base transport factor, the common emitter current gain, and the early voltage. assume complete ionization. further assume the carrier mobility and the minority carrier lifetime are independent of the change in design parameters.

(a) increase emitter doping
(b) increase base doping
(c) increase base width
(d) increase collector doping

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
2. consider a si npn bjt. discuss how a change in one of the design parameters affect the emitter in...
Questions
question
Mathematics, 26.04.2021 22:30
question
Mathematics, 26.04.2021 22:30
question
Health, 26.04.2021 22:30
Questions on the website: 13722359