Engineering, 19.11.2019 06:31 XxKaitlynnxX

Water at 25°c and 1 atm is flowing over a long flat plate with a velocity of 26 m/s. determine the distance from the leading edge of the plate where the flow becomes turbulent, and the thickness of the boundary layer at that location. the density and dynamic viscosity of water at 1 atm and 25°c are rho = 997 kg/m3 and μ = 0.891×10–3 kg/m-s. a)the distance from the leading edge of the plate where the flow becomes turbulent is 1.8cm. the thickness of the boundary layer at that location is 0.5mm. b)the distance from the leading edge of the plate where the flow becomes turbulent is 1.9cm. the thickness of the boundary layer at that location is 0.4mm. c)the distance from the leading edge of the plate where the flow becomes turbulent is 1.7cm. the thickness of the boundary layer at that location is 0.1mm. d)the distance from the leading edge of the plate where the flow becomes turbulent is 1.6cm. the thickness of the boundary layer at that location is 0.3mm.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

You know the right answer?

Water at 25°c and 1 atm is flowing over a long flat plate with a velocity of 26 m/s. determine the d...

Questions