Which of the following statements about ignition systems are
true?
the permanent magnet generator requires power to generate an
ac signal.
the permanent magnet generator uses the principle of induction
to create an ac signal.
the most important components of the triggering section are the
sparks plugs and we spark plug wires.
the coil is part of both the primary and secondary sections.
the magnetoresistive sensor is made up of a permanent magnet
and produces a digital signal.
the hall-effect sensor produces a voltage signal depending on
the presence of a magnetic field.

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.