Someone has suggested that the air-standard otto cycle is more accurate if the two isentropic processes are replaced with polytropic processes with a polytropic exponent n = 1.3. consider such a cycle when the compression ratio is 8, pi = 95 kpa, tl = 150c, and the maximum cycle temperature is 12000c. determine the heat transferred to and rejected from this cycle, as well as the cycle's thermal efficiency. use con- stant specific heats at room temperature.

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k