Engineering, 20.11.2019 22:31 ccispoppin12
The given state of plane stress is known to exist on the surface of a machine component. knowing that e 5 200 gpa and g 5 77.2 gpa, determine the direction and magnitude of the three principal strains
(a) by determining the corresponding state of strain [use eq. (2.43) and eq. (2.38)] and then using mohr’s circle for strain,
(b) by using mohr’s circle for stress to determine the principal planes and principal stresses and then determining the corresponding strains.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
You know the right answer?
The given state of plane stress is known to exist on the surface of a machine component. knowing tha...
Questions
Computers and Technology, 27.09.2019 02:30
English, 27.09.2019 02:30
