For an fe-c binary system, list the carbon concentrations required to achieve the following microstructures/microconstituents: (a) pearlite(b) a mixture of pearlite & proeutectoid ferrite(c) bainite(d) spheroidite(e) a mixture of pearlite and proeutectoid cementite

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.