Engineering, 22.11.2019 05:31 evanlubbe53
For a turning operation, you have selected a high-speed steel (hss) tool and turning a hot rolled free machining steel. your depth of cut will be 0.105 in. the diameter of the workpiece is 1.00 in. a. using a speed of 105 sfpm and a feed of 0.015, calculate the metal removal rate (mrr).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
For a turning operation, you have selected a high-speed steel (hss) tool and turning a hot rolled fr...
Questions
Chemistry, 03.11.2020 17:20
Social Studies, 03.11.2020 17:20
Mathematics, 03.11.2020 17:20
Social Studies, 03.11.2020 17:20
History, 03.11.2020 17:20
Chemistry, 03.11.2020 17:20
Mathematics, 03.11.2020 17:20
