Engineering, 23.11.2019 02:31 emilycarmadelle6653

A10,000 m^3 room has a valve leaking tetrachloroethylene, which is adding 50 mg/min of vapor to the room air. the gev system moves 75 m^3/min of air through the room.
a) what will be the cmax of tetrachloroethylene vapor in the air?
b) if the leak stops after reaching the maximum concentration what will be the vapor concentration in 1 hour?
assume the blower speed of gev in increased to 100 m^3/min.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.

Answers: 3

Answer

Engineering, 06.07.2019 04:20

What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.

Answers: 1

Answer

Engineering, 11.07.2019 01:10

Acantilevered boom is part of an assembly machine and is made of from a steel beam s4x7.7. a tool with a weight of 650 lb moves continuously from the end of the 60in beam to a point 25in. from the support. specify a suitable design factor for the boom (n value), giving the material, the cross-sectional shape, and the dimensions. s= - 45 ksi and s=60 ksi for the steel beam and assume k= -1. desired reliability 0.99.

Answers: 1

Answer

You know the right answer?

A10,000 m^3 room has a valve leaking tetrachloroethylene, which is adding 50 mg/min of vapor to the...

Questions