subject
Engineering, 23.11.2019 04:31 aliviafrancois2000

At a residual chlorine concentration of 3 mg/l, how much disinfection contact time is required to achieve the regulatory requirement for giardia cyst inactivation at ph = 8.0 and ph = 6.0 and 10 deg c for a conventional water treatment plant?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
At a residual chlorine concentration of 3 mg/l, how much disinfection contact time is required to ac...
Questions
question
Mathematics, 22.11.2019 19:31
question
Mathematics, 22.11.2019 19:31
question
English, 22.11.2019 19:31
question
Mathematics, 22.11.2019 19:31
Questions on the website: 13722362