Engineering, 23.11.2019 04:31 taylorwhitfield6

An air-standard cycle with constant specific heats at room temperature is executed in a closed system and is composed of the following four processes:
1–2 v = constant heat addition from 14.7 psia and 80°f in the amount of 300 btu/lbm
2–3 p = constant heat addition to 3150 r
3–4 isentropic expansion to 14.7 psia
4–1 p = constant heat rejection to initial state
the properties of air at room temperature are cp = 0.240 btu/lbm·r, cv = 0.171 btu/lbm·r, and k = 1.4.
a. show the cycle on p-v and t-s diagrams. ( upload your response/solution using the controls provided below.) (you must provide an answer before moving on to the next part.)
b. calculate the total heat input per unit mass
c. determine the thermal efficiency

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

An air-standard cycle with constant specific heats at room temperature is executed in a closed syste...

Questions