subject
Engineering, 25.11.2019 19:31 Naysa150724

Air is heated as it flows subsonically through a duct. when the amount of heat transfer reaches 67 kj/kg, the flow is observed to be choked and the velocity and the static pressure are measured to be 680 m/s and 261 kpa. disregarding frictional losses, determine the velocity, static temperature, and static pressure at the duct inlet. take the properties of air to be k = 1.4, cp = 1.005 kj/kg·k, and r = 0.287 kj/kg·k.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Air is heated as it flows subsonically through a duct. when the amount of heat transfer reaches 67 k...
Questions
question
Health, 13.09.2021 21:20
Questions on the website: 13722363