subject
Engineering, 25.11.2019 21:31 lance31

Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen that is discharged into a river that has a flow rate of 8.7 m/s and a flow velocity of 2.0 ft/sec. the river just upstream of the discharge has a dissolved oxygen concentration of 7.0 mg/l and a lo of 4.7 mg/l. the temperature of the river is 15 °c and the temperature of the wastewater discharge is 24.7 °c. the deoxygenation rate constant (base e) is 0.20 d at 20°c; the reaeration rate constant (base e) is 0.50 dat 20 °c. the bod rate constant (base e) is 0.20 d at 20 °c. assume that the thetas for rate constant temperature corrections are 1.047 for all rate constants. assume sea level and fresh water conditions. a. determine the initial oxygen deficit (mg/l) and the ultimate bod, lo (mg/l) just downstream from the discharge after blending b. the time (days) and distance (miles) to reach the minimum dissolved oxygen concentration. c. the minimum dissolved oxygen concentration (mg/l) d. the dissolved oxygen that could be expected 50 miles downstream from the discharge (mg/l). e. use excel to create a graph of do vs. time. note that this is y vs. x. be sure to label the y and x axis including units and show the excel spreadsheet used to create your graph. the work you show in your calculation in partc will serve as your sample calculation.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
question
Engineering, 04.07.2019 19:20
A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.
Answers: 2
You know the right answer?
Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen tha...
Questions
question
Mathematics, 11.05.2021 03:30
question
Mathematics, 11.05.2021 03:30
question
Arts, 11.05.2021 03:30
question
Mathematics, 11.05.2021 03:30
question
Social Studies, 11.05.2021 03:30
Questions on the website: 13722363